Accessing camera Foscam C1 for video and audio at remote location

You can use the template like this

or the Custom URL like this

Stream Type is rtsp_tcp
rtsp://nick:password@wan-ip:554/videoMain

Two things
1.you are posting in the open forum! I deleted this image.
2.you do not use the correct URL. Must use /videoMain since it is case sensitive.
I send you a PM to continue is closed channel.

-Henrik

SUCCESS…I used the template and worked perfectly…MANY MANY thanks…

Excellent!
Good luck with the rest!
-Henrik

Regarding audio for the C1. Using
Stream Type is rtsp_tcp
rtsp://username:password@wan-ip:554/videoMain
gives video and audio, but the sensitivity of the microphone is very low so the volume must be set to very high. I got this info from another user which sort confirm this:

Hi Henrik,
i just connected one C1 with internet explorer and activated sound. In a
distance of 2 m to camera loudness is like the other sounds on my pc.
best regards
Rainer

Thank you …I did adjust it and seems to be working fine…again thanks for your help