Regarding this point, when upgrading from 1.3.x the camera connected using custom mode will not reconnect automatically.
The settings are not lost so you just need to right click edit source, verify the information and press connect.
This semi-manual process should recover the initial state and configuration. This has to be done only once after upgrading.
Ok, got your message (but deleted it so that nobody else sees login infos). You can normally send me this kind of info by PM by clicking on my name and selecting āMessageā.
However actually what i would need to access directly to the camera (not to NCS), I donāt know if you have forwarded their port 80 (or the port that you define in NCS to connect to the camera) so that itās reachable over internet.
Btw, I could connect and noticed the Invalid Uri errors. There are 2 things that would be great to start with:
upgrade to 1.4.1 I have released yesterday : Netcam Studio 1.5.1 - #3
install Onvif Device Manager and give it a try just to see if itās able to control PTZ (and see if your cameras support Relative, Continuous or Both): ONVIF Device Manager - Browse /onvifdm-v2.2.250 at SourceForge.net
Found a quite detailed article about your cameras:
Not that it really helps in our case, but who know maybe later 
It has some status / configuration urls:
http://192.168.x.x:81/get_onvif.cgi
http://192.168.x.x:81/get_status.cgi
http://192.168.x.x:81/get_rtsp.cgi
http://192.168.x.x:81/get_params.cgi
http://192.168.x.x:81/get_camera_params.cgi
Would be interesting to see what the get_rtsp.cgi returns.
Yes, I also found that article. In fact, it was a major influence for me to buy this camera. At such a low price ($20 from BangGood) I questioned itās quality. So far Iāve been very satisfied with them.
I installed Onvif Device Manager and PTZ works fine with it. I couldnāt find the link to version 1.4.1. The only link I found was to 1.4.0.
Dennis
The link was still named 1.4.0 but thatās the oneā¦ If it works in OnvifDM then we should be able to support it in NCS.
Got your PM. Please start giving a try to 1.4.1 already. If it still doesnāt work iāll try to have a look through VNC later or as soon as possible.
It seems 1.4.1 doesnāt help the PTZ problem. Thanks for everything.
Since the cameraās video is working, the PTZ problem isnāt a high priority. My users are very happy with the cameras and your software.
Dennis
Ok, as you sent me info to the camera, I will give it a try over onvif from my dev system as soon as I have a moment. Thanks!
I tried but I have the feeling that they do not expose onvif web services on their default http port.
so itās actually the onvif port which i would need to be forwarded so I can try to query it. I donāt know if you had this information in OnvifDM.
Actually on your side with 1.4.1, even NCS should report on which port it has located the service address (ending by /device_service)
Thanks
Digoo uses port 10554 for ONVIF. Iāve opened the port. I tried to use IP Centcom but it couldnāt connect to port 10554.
Thanks again, Dennis
is port 10554 forwarded on your system so that I can try from here ?
I follow your instruction and used NCS. It reports port 10080 for /device_service. Iāve forwarded that port as well.
Dennis
let me give it a try, will come back to you quicklyā¦
well for me it works in both onvif dm and netcam studio (continuous mode only).
itās just that i was tricked because itās not the camera that you forwarded on port 82 that iām controlling but another one with a kitchen table and a black cat + a black/white cat)
the one on port 82 is now switched in night vision mode (and i forced this as video stream so couldnāt see it moving initially).
i had to hardcode the onvif url in netcam studio but then once set in continuous mode itās working with 1.4.1 without modifications
in netcam studio did the url look like that after you selected it in the onvif sources?
url also ending by :10080 here on top ?
and now cat plays with the camera as it was moving 
Wonderfull!!! Itās working great. I have one more question. When I access NCS with my browser, PTZ takes one step when I click on the arrows. However, when I access it with the Android app, when I click an arrow it takes off in that direction and I canāt stop it. What am I doing wrong?
Dennis
Itās because itās still the ācurrentā mobile app.
Iām still working on Netcam Studio App for Netcam Studio 2 so it hasnāt been released yet.
Now Iām looking for an inexpensive outdoor PTZ camera for the dogs play yards. I found one on eBay. It says it supports ONVIF. Is there any question I should ask them to increase the possibility it will work with NCS?
Dennis
