Spent a few hours trying to get the Fosbaby P2 working today, I used to have it working fine then rebuilt my server.
So here’s a guide to how I got it working:
-There is no profile for the fosbaby camera
-onvif connections will cause PTZ to not work
-RTSP will default on the camera to 554 and HTTP on 88. (but they dont work in netcam)
Because the camera uses the same firmware as Foscam FI9831W select that profile in Network Camera.
-Set the HTTP port to 88 (this is used for PTZ)
- Set the RTSP port also to 88.
- Set the profile to “RTSP H264 (port 80) Main” profile, add the connection details for ip and login and everything should work from there.