Recording Length After Motion Stopped

Netcam Studio
1

Hi,

Is there a way I can set-up a pre-record and post-record duration. More important to me is the post record setting so it keeps recording about a minute after motion stops

Thanks!

2

Hi,
Pre-recording is fixed to 50 frames, about 2 seconds. Post-recording can be adjusted with Trig Duration also in the Configuration Features for each camera. Default is set to 10 seconds which means that if motion is not triggered within these 10 seconds the recording stops after 10 seconds. Total length will theoretically be 2+10 seconds. Increase Trig duration to 60 seconds and test.
-Henrik