Camera Support Logitech HD Pro Webcam C920

#9

“IP - is IP address of iPhone”? No. Here you should enter the IP of the computer that runs NCS. The same IP as you use in 2. Probably it is already filled in.

#10

Henrik

Step 2 Still no good

I am entering

http;//the ip address of the pc running NCS [10.234.142.150]-to-NCS8100

also is it the LAN IP address of the PC or the WAN IP address of the PC

is this correct if so still does not work

#11

¨
If the iPhone is connected to the LAN 10…234… it should of cause be the LAN Ip to the computer.
If you in the browser of the iPhone enter http://10.234.142.150:8100 and do not get the login box the iPhone cannot be connected to the LAN. What IP to the iPhone have?

Use IE or FF or Chrome on a computer on the LAN and enter http://10.234.142.150:8100 Then you must get the login box from NCS.

#12

Henrik, thanks so much

Worked

New Problem

Trying to run Netcam Studio Service constantly without the need to start NCS manually

I go to

-Control Panel

-Admin Tools

-Services

-Select NCS and right click to start the service

Error

Service Started and stopped because not in use by other services

I am on Windows 10

What am I doing wrong

Thanks again as always

.

#13

Good, we like progress. Next time we meet it’s time for you to buy me a Beer :slight_smile:
This error message comes when one tries to start NCS Service while NCS X is running. They cannot run at the same time. So Exit NCS X and start the service again.
I checked the error message and it is an error in the message :slight_smile:
image

Change also Startup Type from Manual to Automatic or Automatic Delayed if you have many cameras.

Maybe it is me who should buy you a Beer :slight_smile: You are welcome to Brazil.

As always,
Henrik

#14

Henrik

Need your help again

This time the beer is on me

My home network is configured as follows

Main building a Wi-Fi router (192……) behind a cable mode

Second building is a retail shop where my NCS and camera are located on my Windows 10 PC

Second (subnet) wireless router (10……in that building)

When I am in the building with the retail store I can connect via web browser on PC

Or Via web browser on iPhone

Or via NCS IPhone IOS app

BUT when connected to the primary router (192,) I cannot connect via browser on iPhone or via NCS IOS app

HELP

Please

PS I have created a static IP for the PC with NCS running and I have opened up port 8100 for port forwarding, could it be a firewall issue or ???

I get the error message

“Safari could not open the port because the server stopped responding”

#15

When you are in the main building and want to connect to NCS in the shop you must enter the Public IP to the modem/router in the shop. I assume that the port forward for port 8100 goes to the computer running NCS:

So check what the public IP is to the modem/router in the shop. Either you can see this in the router or you can search for “what is my ip” in the browser on the computer in the shop. That will give you the public IP for the shop.
When you are in the main building enter in the browser
http://(public-IP-shop):8100

-Henrik

#16

Will try

Thanks as always

Very helpful

#17

Thanks will the public up for the pc in the shop be a static public up address

#18

A static IP is not necessary. Usually, you get a dynamic IP. I have several dynamic IP addresses for my systems since there are no more IPv4 addresses available in the IP system. Instead you use a DDNS, Dynamic DNS Service, like dyn.com or some other. In the router in the shop most likely have such a service built in with client to some DDNS services. Use that. When you are in your main building and want to access the cameras you do not use the public IP, you use an alias for example myshop.dyndns.com. That name is always valid and the DDNS service keep track of if the public IP changes. If or when that happen it do not affect your alias name.

So start to go into the configuration of your shop router and look what DDNS client they support.

-Henrik

#19

Wow way too complicated for me

I created a DYN account

Created to host names and still cannot connect

Am I trying to set up the Linksys router or am I trying to configure remote access

No DDNS support from DYN

#20

Do you have the public IP to the modem/router in the shop?

#21

Well let me restate when I access the router page I am of course on my pc

When I type what’s my up a public up returns but is that the router or my pc ???

That’s one of my questions

#22

I do have the public ip address but I assume it’s the ip address of my pc which connected to the router in the shop as o obtain the public up address via the what’s my opinion on a web browser

This is one question I am wondering about

#23

It looks like in the figure below. I am not interested in the IP to the router. That is probably 10.234.142.1.
I must know the public IP number that your Internet Service Provider have given you. Here called publicIP.

image
image.png815×246 8 KB

The easiest way to get this public IP is to open a browser on the same PC that runs NCS. Go to google.com. In the search field write:
what is my ip
In return you will get an IP address. That is the Public IP address. If the router is set up as in my figure you can now use this public IP as follows. On the same PC in the shop enter
http://publicIP:8100
This should connect you to NCS.

In the main building write this in a browser:
http://publicIP:8100
This should also connect you to NCS in the shop.

-Henrik

#24

Thanks in the main building (remote) can the browser be an iPhone

I cannot connect in the main building on my iPhone using the public IP address on port 8100

#25

Since everything works in the shop it is something on the way that you need to check. I sen you a PM that is a private channel. Please answer that and include the public ip and I check from my side.

-Henrik

#26

Henrik, When I configure the router for port forwarding for NCS do I want port 8100 or port 8080

Thanks

#27

See picture above.
Running as a service Using Netcam Studio Service

unlisted #28