Can't see one of my IPCAM who work the VLC

Hello
Sorry to request help., Very smart soft (Netcam Studio X v1.2.0.0)
I’m currently use it fine with usb webcam and 3 other IP Cam but one of them can’t bee seen.

First the working one :
rtsp:// USER:PWD @192.168.1.23:554/ user=USER_password=PWD_channel=1_stream=1.sdp?real_stream
VLC flow description :
Flux 0

  • Type : Vidéo
  • Codec : H264 - MPEG-4 AVC(part10) (h264)
  • Résolution : 704x578
  • Résolution d’affichage : 704x576
  • Débit d’images : 25
  • Format décodé : Planar 4:2:0 yuv

The cam I can’t see

rtsp://USER:PWD@192.168.1.22:80/1
VLC flow description :
Flux 0

  • Type : Vidéo
  • Codec : H264 - MPEG-4 AVC(part10) (h264)

Flux 1

  • Type : Audio
  • Codec : PCM MU-LAW (mlaw)
  • Fréquence d’échantillonage : 8000Hz
  • Bits pas échantillon : 8

Flux 2

  • Type : Vidéo
  • Codec : H264 - MPEG-4 AVC(part10) (h264)
  • Résolution : 720x578
  • Résolution d’affichage : 720x576
  • Format décodé : Planar 4:2:0 yuv

Flux 3

  • Type : Audio
  • Codec : PCM MU-LAW (mlaw)
  • Fréquence d’échantillonage : 8000Hz
  • Bits pas échantillon : 8

Is someone have an idea wy the second cam do not work in the app ?
The steam is perfect in VLC.

Regards

Did you give a try in the settings to “Use VLC as decoder” option in Netcam Studio (Options, Decoding, Decoder -> VLC instead of INTERNAL) ?

This requires restarting or at least reconnecting the sources to take effect.

It’s not really recommended, apart when you have such case of issues when our internal decoder cannot deal with the stream but in such cases it may help.

Hello
Thanks for the help, but I’ve already done that test without more chance.
Using VLC for decoding make no change.