The camera support ONVIF. Login to the camera and enable ONVIF and set a password.
When adding the camera to Netcam Studio use the tab for ONVIF Source. Click on Browse to find the camera in the listing.
If the ONVIF do not work use the tab for Custom URL. Set stream type to rtsp_tcp or rtsp_udp. Set Address to:
rtsp://username:password@cameraIP:554/live/ch00_0
or
rtsp://username:password@cameraIP:554/h264
Do not use special characters like %, &, # etc. in the password.
This is one of those problematic cameras designed for an App so test.