Minor issues and questions

Netcam Studio
8

Hello @myyodamail

  1. Axis 213 PTZ control: I have just install the latest version NCS and test your Axis 213 PTZ and the Zoom control works properly. You can install the current version NCS and try again. I used template Axis 213 PTZ.
  2. Your second IP camera is very likely to be AOTE TEK HD IP camera, I can find its JPEG streams:

Main Stream:(HD)
http://USERNAME:PASSWORD@IPADDRESS:PORT/cgi-bin/snapshot.cgi?stream=0
Sub Stream:
http://USERNAME:PASSWORD@IPADDRESS:PORT/cgi-bin/snapshot.cgi?stream=1
These above streams can be connected in NCS as custom target URL and stream type is JPEG

Perhaps you have not configure RTSP forwarding for this IP camera so that I can not check its RTSP streams. However, please give a try on your VLC to see if the below streams work:

rtsp://USERNAME:PASSWORD@IPADDRESS:RTSPPORT/mpeg4
rtsp://USERNAME:PASSWORD@IPADDRESS:RTSPPORT/mpeg4cif