Mobotix T25 door intercom

the T25 works with the Netcam Studio default setting Mobotix M25M so far quite well, unfortunately without audio.

Is there a trick/setting to change this or even better to support the T25 in the default?

To make that work the camera must support the ONVIF standard. Then use the tab for ONVIF Source when adding the camera and click on Browse. If it works the camera should be in the listing. Also login to the camera and look for ONVIF and that’s enabled.
Alternative is if you have the URL rtsp://xxxx to the camera. Then use the tab for Custom URL.

1 Like