Just in case someone also has the IP Camera, Wifi Camera Mini Camera with Infrared Night Vision 2 Way Audio Motion Tracker CCTV P2P Home Security (Bracket Type） from “ShenziTech”:
- System kernel version: KerV380E12_PCARD_V50_V2.2.0_20160506
- System firmware version: HwV380E12_WF3_PCARD_V50_20160217
By default this version has only port 8800 open. I followed the instructions by @grunwald and afterwards have ports 554, 8800 and 8899 open. Here is exactly what I did and what happened:
- Power the camera on
- Remove SD card
- Put the ceshi.ini file on the card (mine had unix line endings and no blank line after the two lines, but I am pretty both of this does not matter)
- Put the SD card into the camera
- Switch the camera off and on again
- The camera says:
- System starting
- chinese
- System startup completed
- establishing access point
- access point established
- chinese (same as before if I am not mistaken)
- The access point is then not established and I needed to power the cam off an on again.
The following address then works with vlc player:
rtsp://admin:password@192.168.xx.xx:554/live/ch00_1
Thanks again @grunwald
p.s.: The login via a github account seems to be broken. I was getting the Redirect URI mismatch error all the time.