I used my V380 for a while then I had some connection problem, then I’ve just did a hard reset (3 seconds on reset button)
Now I can hear camera boot and says “APN established” but I can’t see on WIFI so I can’t connect to setup.
I downloaded V300_V380E3_C_V126.96.36.199.zip (given above) updated the firmware but still no APN service to connect and configure.
Any help / advice?
I am using CCTV camera based on v380 and using windows app downloaded from www.av380.cn
This app is working fine and I can login on my laptop when it use my home internet but when i use same login details on my office’s PC then it shows network connection error because we have firewall in our office.
So which port should be opened in our office to proper use of v380 windows based app.
My 2nd issue is that when we give nick name to any camera in v380 app with a account and we use same account details with another device then we can find connected camera but nick name not.
May be this app is storing nick name locally in device.
Please help that v380 pc app could work after open ports and nick name should remain same with same login details in another device.
Just in case someone also has the IP Camera, Wifi Camera Mini Camera with Infrared Night Vision 2 Way Audio Motion Tracker CCTV P2P Home Security (Bracket Type） from “ShenziTech”:
- System kernel version: KerV380E12_PCARD_V50_V2.2.0_20160506
- System firmware version: HwV380E12_WF3_PCARD_V50_20160217
By default this version has only port 8800 open. I followed the instructions by @grunwald and afterwards have ports 554, 8800 and 8899 open. Here is exactly what I did and what happened:
- Power the camera on
- Remove SD card
- Put the ceshi.ini file on the card (mine had unix line endings and no blank line after the two lines, but I am pretty both of this does not matter)
- Put the SD card into the camera
- Switch the camera off and on again
- The camera says:
- System starting
- System startup completed
- establishing access point
- access point established
- chinese (same as before if I am not mistaken)
- The access point is then not established and I needed to power the cam off an on again.
The following address then works with vlc player:
Thanks again @grunwald
p.s.: The login via a github account seems to be broken. I was getting the Redirect URI mismatch error all the time.
I’m having no end of troubles trying to access my camera external to my home network. I’ve downloaded NCS and ONVIF Device Manager, but have had absolutely no luck watching any streams at all from my camera. both NCS and ODM find the camera just fine, but each attempt to watch anything results in “No Signal” for ODS and using NCS always results in “Connection failed”. Using their apps, MVCMS Lite on PC and V380 Pro on Android, I can watch it anytime I want, provided I’m on my home WiFi.
My camera details are as follows:
Firmware version: V380E12_WF3_PTZ_20160217
Software version: V380E12_PTZ_V188.8.131.52_20181126
I’ve seen the messages about upgrades, but the links don’t appear to work any longer, or maybe I’m just impatient. Either way, is there a good link to get the upgrade files from that I’ve read about?
I’ve tried forwarding ports 554 and 5050, 8800 and 8899, but again, no luck.
I’ve tried emailing (twice) firstname.lastname@example.org and haven’t heard anything back at all.
As far as I understand, only the “official” tools are working, even from the home wifi? Here is a short list for diagnosis and hopefully solution:
Step 1: Determine open ports
Use a port scanner (e.g. nmap under Linux) to scan the cam for open ports. If you find only port 8800 open, this would explain why only v380 and MVCMS are working.
Step 2: Try to open more ports
The links from sk8darr and smashin are working, I used both yesterday. But with the V380E12, I would first try ceshi.ini file to open rtsp and onvif as described by grunwald and me.
If this does not work (= Step 3 fails), you can also try the upgrades.
Step 3: Verify additional open ports
Run the port scan again. Hopefully port 554 and 8899 are open now. Verify with e.g. vlc player. The exact URL can probably be guessed from the left panel in MVCMS.
Step 4: External access
First off: Have some security and privacy concerns. There are multiple options:
The “official” way
Create a cloud account with the V380 app. If the camera is connected to your home wifi and has internet access, everything should magically work: You can now look at the cam with the app from everywhere.
Behind the scenes, the data stream from your camera is passed to a public cloud server. V380 logs into this server and you can retrieve the stream to your phone. We do not know how well the cloud server is secured, whether the streams are encrypted at all etc. In principal it is possible to encrypt the stream end to end, but whether this is done, we do not know.
If port 554 on the camera is open and you know its ip in your home network, you can configure a decent router to expose this port to the public. From outside, you must then connect to the public ip of your home network. A dynamic DNS service is helpful here.
For this to be reasonably secure, the user name and password for the cam should be long and strong AND rtsp authentication should happen encrypted (I have not checked with my camera, but now I will…) .
This is probably an easy and secure way.
SSH port forwarding/tunneling
In combination with a dynamic dns service, this would be my goto, but it requires an ssh server in your home network. The concept is explained e.g. here.
Start MVCMS Lite and do the search for devices. When the camera is found check the port in the list. Most likely it is 5050 which is a very special multimedia port with an encrypted stream. You can see the video in MVCMS Lite and in the App since they use port 5050. ODM and NCS do nut use these ports. NCS use port 554 with the correct URL and ODM can use port 80 or 8080 if the camera is enabled for that.
Yes, you are correct, both official tools work within my home’s WiFi, but not externally. I have the same security concerns as well and was considering setting up a personal VPN at my home to connect to it. I do have a V380 cloud account set up, but I only get a black screen with the spinning circle.
I’ve tried using telnet, and ssh, to get to the camera, but each connection is refused. I’ll try those links again, I was probably just being impatient.
I was going to scan it for open ports last night, but ran out of time, I’ll try that tonight when I get home.
I downloaded the update files and the first time I tried using them I got an “Upgrade failed” message. I then tried reformatting my MicroSD and copying the files again, but could never get it to give that message, or any other for that matter, after inserting the MicroSD other than the typical “System is starting”, etc.
I’m hoping that if I’m able to access the filesystem I can determine/fix the issue. I’ve tried telnet and ssh to get to the camera, but each connection is refused.
- THANK YOU very much the Upgrade file worked like a charm.
- Please can you help me get the full firmware for v380 ip cam my 2nd cam keeps rebooting. can’t reset it… Thanks!!!
Got a new SD card, other one was obviously bad, and now I’m updated and can view the stream in NCS or OVM, or VLC but still within my home network. Looking into a VPN solution as I prefer security over convenience.
Thanks for your help!
It turns out the issue is my phone, I’m able to get to the camera from any other device without issue, so no VPN, port forwarding, etc. necessary. I already had a cloud account, but it simply didn’t work on my phone. Will try blowing away all the app data and logging in fresh on my phone to see if that will resolve the problem, but either way, I’m very satisfied due to your help.
Sure, I will try to help you in what I can.
Did you try to remove the sd card from de camera and test if with that the camera boot normally?
This forum has helped me get a better understanding of the V380s
I have a couple of camera having the following details
System app version:
AppV380E23_PTZ ETH V 302020180620
System kernel version:
System firmware version:
HWV380E23_WF1_PTZ ETH 20160217
I was and still having trouble getting the RTSP stream for the camera (I will try the ceshi.ini method)
Although I saw many of your guys indicated that the device has telnet support but were not able to get in, I was able to get into the using telnet by simply using the username root and no password
I was able to l locate the config file at “/mnt/mtd/mvconf/factory_const.ini” where I did add the rtsp line but that doesn’t seem to be still working even after the reboot.
Anyways, I’ll probably figure out a way now, but I wanted to share the telnet update in the meanwhile.
Hey, @Yoni how did you get this camera working with Home Assistant? Could you share your configuration.yaml?
Mine is as follow:
camera: - platform: generic still_image_url: ????? stream_source: rtsp://192.168.0.XXX:554/live/ch00_1 name: Camera username: XXXXX password: XXXX
What did you put in your still_image? I managed to get the camera working with rtsp using VLC Media. But no luck getting it to work with Home Assistant.
And did you manage to get it working with ONVIF as well?
Hi, did you manage?
Is there a way to control the camera from Home Assistant also for other commands (PAN, audio, others)?
Not yet =/
ok, I got RTSP working with ceshi.ini , but now RTSP stream is available with any password. Can you please confirm that you see this too?
I followed the instructions to open rtsp on a v380 Panoramic (light bulb) cam.
Did anybody manage to find a solution for start/stopping the LEDs remotely (besides using the iOS/Android apps)?
If I manage to do this this camera is a keeper.
I have the same camera with rtsp working but with the same concerns:
- No password to access to the streaming.
- How can I be sure the camera is not accessible from the outside or is sending anything to the outside?
I blocked the device in the router, so it should no be able, but…I want to be 100% sure
Sorry, there is nothing like 100% in this business
You can install Wireshark. There you can monitor the traffic from/to the camera.
If you really are that concerned maybe you should buy a camera that you do not need to crack to get to work and that also use a password of your choice.